If you’re like most coffee lovers, you can’t start your day without a hot cup of joe. And if you’re like most people, you probably have a Bunn coffee maker.
These machines are some of the best on the market but must be cleaned regularly. In this article, we will teach you how to clean your Bunn coffee maker in six easy steps!
Why you Need To Clean Your Bunn Coffee Makers
Like any other appliance, your Bunn coffee maker needs to be cleaned regularly. If you don’t clean it, the build-up of coffee oils and residue can cause the machine to malfunction.
Not only will this affect the quality of your coffee, but it can also shorten the lifespan of your coffee maker.
Cleaning your Bunn coffee maker is a simple process that only takes a few minutes. So, gather your supplies, and let’s get started!
How to Clean a Bunn Coffee Maker in Six Easy Steps
Follow these simple steps to keep your Bunn coffee maker clean and running like new:
Step One: Unplug the machine and remove the water tank
First, unplug the coffee maker and remove the water tank. If you know how to unplug the water tank from your Bunn coffee maker, then this task is quite easy for you. It’s a small, cylindrical container that sits on top of the coffee maker.
To remove the water tank, hold onto the handle and lift it straight up. Be careful not to spill any of the water inside! If any coffee or residue remains in the tank, pour it into a sink or bowl.
To remove the brew head, twist it counterclockwise until it comes off. Again, be careful not to spill any of the coffee inside! If any coffee or residue remains in the brew head, pour it into a sink or bowl.
Step Two: Disassemble the machine
The next step is to disassemble the machine. This can be done by removing the cover and the drip tray. Several screws need to be removed in order to take these pieces off. Be careful not to lose any screws, as they can be difficult to replace.
Once the cover and drip tray are removed, you can access the brew head and water chamber. These parts should be cleaned with a brush or a toothbrush. Be sure to remove all of the coffee oils and residue from these areas.
Next, remove the spray arm by unscrewing it from the brew head. You can then clean it with a dishwasher-safe pad or a brush. Be sure to rinse it well before reassembling it.
The last part of the machine that needs to be cleaned is the cover. This can be done by using a damp cloth and some dish soap. Be sure to wring out the cloth well before wiping down the cover.
Step Three: Soak the parts in warm water
Now that the parts are separated, you can soak them in warm water. This will help loosen up any built-up coffee oils and residue. Be sure to soak all of the parts, including the brew head, water chamber, and spray arm.
If you have a dishwasher, you can also place the parts in the dishwasher. This will help to clean them more thoroughly. However, be sure to check your owner’s manual for specific instructions on cleaning the dishwasher parts.
Step Four: Clean the pot, funnel, and spray head
Once the parts have been soaking for a while, it’s time to clean them. Use a mild detergent and a soft cloth to clean them. Be sure to rinse them well before putting them back together.
The pot, funnel, and spray head are the easiest parts of the machine to clean. They can be washed with a dishwasher-safe pad or a brush. Just be sure to rinse them well before reassembling them.
Step Five: Reassemble the machine
Now that all of the parts have been cleaned, it is time to reassemble the machine. Be sure to follow the order in which the parts were removed, and ensure that all the screws are tight. If you have any questions about assembly, consult your owner’s manual.
Once the machine is assembled, it is time to fill it with water and test it out. Run a pot of water through the machine to ensure it works properly. If everything is in order, you can now enjoy a cup of fresh coffee!
Six: Fill up the water tank and plug in the machine
Finally, it’s time to fill the water tank and plug in the machine. Be sure to follow the instructions in your owner’s manual for filling up the water tank.
Once the machine is plugged in, you can test it out by running a pot of water through it. If everything is in order, you can now enjoy a cup of fresh coffee!
Now that your machine is clean, you can enjoy a cup of fresh coffee without any worry about residue or oil build-up. Be sure to clean your machine regularly to keep it in top condition.
Thanks for reading our article on how to clean Bunn coffee makers! We hope you find this information helpful.
MD Azizul Hakim is a content creator and the co-founder of www.queekcoffee.com. He has been writing content and reviews for over five years. He loves to brew coffee and serve it with his colleagues.
